Brother DCP-L5500D User Manual

Level 1 Level 2 Level 3 Level 4 Descriptions
Options Contrast
- - Adjust the contrast.
Broadcasting Add Number Add
Number
Send the same fax message to more than
one fax number.
Add from
Address
book
Search in
Address
book
Delayed Fax Delayed Fax
- Set the time of day the delayed faxes will
be sent.
Set Time
-
Real Time TX
- - Send a fax without using the memory.
Coverpage Setup Coverpage
Setup
- Set the machine to automatically send a
cover page that you have pre-
programmed.
Coverpage
Note
-
Total Pages
-
Overseas Mode
- - Set to On if you have difficulty sending
faxes overseas.
Glass Scan Size
- - Adjust the scan area of the scanner glass
to the size of the document.
Set New Default
- - Save your settings as the default.
Factory Reset
- - Restore all settings back to the factory
settings.
Save as
Shortcut
- - - Save the current settings as a shortcut.
[Fax] (When Fax Preview is On)
Level 1
Level 2 Level 3 Level 4 Descriptions
Sending
Faxes
Redial(Pause) - - Redial the last number called. When you are entering
a fax or telephone number on the Touchpanel, Redial
changes to Pause on the LCD. Press Pause when
you need a delay while dialling numbers, such as
access codes and credit card numbers. You can also
store a pause when you set up addresses.
Tel(R) - - Tel changes to R when PBX is selected as the
telephone line type. You can use R to gain access to
an outside line or to transfer a call to another
extension when connected to a PBX.
Address Book
- - Select the address of the recipient from the address
book.
Call History
- - Select a number from the Outgoing Call history and
then send a fax to it, add it to the Address Book, or
delete it.
Fax Start
- - Send a fax.
Options
- - Select your settings.
Save as
Shortcut
- - Save the current settings as a shortcut.
629

Brother DCP-L5500D Specifications

General

Brand	Brother
Model	DCP-L5500D
Category	All in One Printer
Language	English