EasyManuals Logo

Brother DCP-L5652DN User Manual

Brother DCP-L5652DN
731 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #292 background imageLoading...
Page #292 background image
Home > Fax > Telephone Services and External Devices > External TAD (Telephone Answering Device)
External TAD (Telephone Answering Device)
Related Models: MFC-L5700DW/MFC-L5705DW/MFC-L5800DW/MFC-L5850DW/MFC-L5900DW/
MFC-L6700DW/MFC-L6800DW
You can connect an external Telephone Answering Device (TAD) to the same line as your machine. When the
TAD answers a call, your machine will “listen” for the CNG (fax calling) tones sent by a sending fax machine. If it
hears them it will take over the call and receive the fax. If it does not hear them, it will let your TAD take a voice
message and the LCD will show [Telephone].
The external TAD must answer within four rings (we recommend setting it to two rings). This is because your
machine cannot hear the CNG tones until the external TAD has picked up the call. The sending machine will
send CNG tones for only eight to ten seconds longer. We do not recommend using the toll saver feature on your
external TAD if it needs more than four rings to activate it.
Unless you are using Distinctive Ring, the TAD must be connected to the EXT. jack of the machine.
If you subscribe to your telephone company’s Distinctive Ring service:
You may connect an external TAD to a separate wall jack only if you subscribe to your telephone company’s
Distinctive Ring service, have registered the distinctive ring pattern on your machine, and use that number as
a fax number. The recommended setting is at least four rings on the external TAD when you have the
telephone company’s Distinctive Ring service. You cannot use the Toll Saver setting.
If You Do Not Subscribe to the Distinctive Ring Service:
You must plug your TAD into the EXT. jack of your machine. If your TAD is plugged into a wall jack, both your
machine and the TAD will try to control the telephone line. (See the illustration.)
1
1
2
1 TAD
2 Protective Cap
1
IMPORTANT
DO NOT connect a TAD elsewhere on the same telephone line.
If you have problems receiving faxes, reduce the Ring Delay setting on your external TAD.
Related Information
Telephone Services and External Devices
Connect an External TAD
Record an Outgoing Message (OGM) on the External TAD
285

Table of Contents

Other manuals for Brother DCP-L5652DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother DCP-L5652DN and is the answer not in the manual?

Brother DCP-L5652DN Specifications

General IconGeneral
Printer TypeLaser
FunctionsPrint, Copy, Scan
Automatic Duplex PrintingYes
ADF Capacity50 sheets
Memory256 MB
Processor800 MHz
Monthly Duty CycleUp to 50, 000 pages
Print Speed42 ppm
Print Resolution1200 x 1200 dpi
Paper Input Capacity250 sheets
Scanner ResolutionUp to 1200 x 1200 dpi
ConnectivityUSB, Ethernet
Mobile PrintingBrother iPrint&Scan, Google Cloud Print, AirPrint, Mopria
Toner YieldStandard: 3, 000 pages, High Yield: 8, 000 pages

Related product manuals