Level 1 Level 2 Level 3 Level 4 Descriptions
WLAN
(For wireless network
models)
TCP/IP DNS Server Primary
Specify the IP address of the
primary DNS server.
Secondary
Specify the IP address of the
secondary DNS server.
APIPA
- Set the machine to allocate the
IP address from the link-local
address range automatically.
IPv6
- Turn the IPv6 protocol on or off.
To use the IPv6 protocol, go to
the Brother Solutions Center at
support.brother.com for more
information.
Setup Wizard
- - Configure the wireless network
settings using the setup wizard.
WLAN
Assistant
- - Configure your wireless
network settings using the
Brother CD-ROM.
WPS
- - Configure your wireless
network settings using the one-
button push method.
WPS w/ PIN
Code
- - Configure your wireless
network settings using WPS
with a PIN.
WLAN Status Status
- View the current wireless
network status.
Signal
- View the current wireless
network signal strength.
SSID
- View the current SSID.
Comm. Mode
- View the current
Communication Mode.
MAC Address
- - View the machine's MAC
address.
Set to
Default
- - Restore the wireless network
settings to the factory settings.
WLAN Enable
- - Turns the wireless interface on
or off.
Wi-Fi Direct
(For wireless network
models)
Push Button
- - Configure your Wi-Fi Direct
network settings using the one-
button push method.
PIN Code
- - Configure your Wi-Fi Direct
network settings using WPS
with a PIN code.
Manual
- - Configure your Wi-Fi Direct
network settings manually.
Group Owner
- - Set your machine as the Group
Owner.
Device
Information
Device Name
- View your machine's device
name.
SSID
- View the Group Owner's SSID.
When the machine is not
connected, the LCD displays
Not Connected.
636
To Next Page
Loading...
Need help?
General
