Chapter 2
8
Before you begin to use
Secure Function Lock 3.0 2
You can configure the Secure Function Lock
settings using a web browser. Before
configuration, the following preparations are
needed.
a Start your web browser.
b Type “vmachine’s IP address/” into
your browser’s address bar (where
“machine’s IP address” is the IP address
of the Brother machine).
For example:
v192.168.1.2/
You can find the machine’s IP address in
the Network Configuration List
(see Software and Network User's Guide).
c Type an Administrator password in the
Login box. (This is a password to log on
to the machine’s web page.) Click .
If you are using a web browser to
configure the machine’s settings for the
first time, set a password (see
Software and Network User's Guide).
Turning Secure Function
Lock on/off 2
a Click Administrator.
b Click User Restriction Function.
c Select Secure Function Lock or Off.
d Click Submit.
The Secure Function Lock icon is
displayed beneath the time and date.
To Next Page
Loading...
Need help?
General
