Sending a fax (MFC models only)
23
3
Real Time Transmission 3
When you are sending a fax, the machine will
scan the document into the memory before
sending it. As soon as the telephone line is
free, the machine will start dialling and
sending.
Sometimes, you may want to send an
important document immediately without
waiting for memory transmission. You can
turn on Real Time TX.
• If the memory is full and you are sending a
fax from the ADF, the machine will send
the document in real time (even if Real
Time TX is set to Off). If the memory is
full, faxes from the scanner glass cannot
be sent until you clear some of the
memory.
• In Real Time Transmission, the automatic
redial feature does not work when using
the scanner glass.
a Load your document.
b Do one of the following:
When Fax Preview is set to Off,
press (Fax).
When Fax Preview is set to On, press
(Fax) and Sending Faxes.
c Press Options.
d Swipe up or down, or press a or b to
display Real Time TX.
e Press Real Time TX.
f Press On (or Off).
g Press OK.
h Enter the fax number.
i Press Fax Start.
Overseas Mode 3
If you are having difficulty sending a fax
overseas due to a bad connection, then
turning on Overseas Mode may help.
This is a temporary setting that will only be
active for your next fax.
a Load your document.
b Do one of the following:
When Fax Preview is set to Off,
press (Fax).
When Fax Preview is set to On, press
(Fax) and Sending Faxes.
c Press Options.
d Swipe up or down, or press a or b to
display Overseas Mode.
e Press Overseas Mode.
f Press On.
g Press OK.
h Enter the fax number.
i Press Fax Start.
To Next Page
Loading...
Need help?
General
