Brother DCP-T500W - Changing the Fax Resolution

Chapter 3
8
Changing the fax resolution 3
The quality of a fax can be improved by
changing the fax resolution. Resolution can
be changed for the next fax or for all faxes.
To change the fax resolution for the
next fax
3
a Load your document.
b Press (FAX).
c Press Resolución fax
(Fax Resolution) then a or b to choose
the resolution.
Press OK.
d Enter the fax number.
e Press Inicio Negro (Black Start).
To change the default fax resolution 3
a Load your document.
b Press (FAX).
c Press Menú (Menu), 3, 2, 1.
d Press a or b to choose the resolution
you want.
Press OK.
e Press 2 so you can continue sending
your fax.
f Enter the fax number.
g Press Inicio Negro (Black Start).
NOTE
You can choose four different resolution
settings for faxes.
Options
Standard Suitable for most typed
documents.
Fine Good for small print and
transmits a little slower than
Standard resolution.
S.Fine Good for small print or artwork
and transmits slower than
Fine resolution.
Photo Use when the document has
varying shades of gray or is a
photograph. Photo has the
slowest transmission.