Brother DCP-T500W - Cleaning the Paper Pick-Up Rollers

Routine maintenance
33
A
Cleaning the paper pick-up
rollers A
a Unplug the machine from the AC power
outlet.
b Pull the paper tray completely out of the
machine.
NOTE
If the machine has been feeding multiple
pages when there are only a few sheets of
paper left in the tray, clean the Base
Pad (1) with a soft lint-free cloth
moistened with water.
After cleaning, wipe the pad with a dry,
soft lint-free cloth to remove all moisture.
c Open the Jam Clear Cover (1) at the
back of the machine.
d Clean the Paper Pick-up Rollers (1) with
a soft lint-free cloth moistened with
water.
Slowly turn the rollers so that the whole
surface is cleaned.
After cleaning, wipe the rollers with a
dry, soft lint-free cloth to remove all
moisture.
e Close the Jam Clear Cover.
Make sure the cover is closed
completely.
f Put the paper tray firmly back in the
machine.
g Plug the machine back into the AC
power outlet.
1
1
1