Brother DCP-T500W - Loading Documents; Using the ADF

Chapter 7
24
To change the default setting, follow the
instructions below:
a Press Menú (Menu).
b Press a or b to choose 2.Copy.
Press OK.
c Press a or b to choose 3.Quality.
Press OK.
d Press a or b to choose Normal or Best.
Press OK.
e Press Detener/Salir (Stop/Exit).
Enlarging or reducing copies 7
You can choose an enlargement or reduction
ratio. If you choose Fit to Page, your
machine will adjust to the size you set in
Paper Size.
(MFC-T800W)
7
a Load your document.
b Press (COPIA (COPY)).
c Enter the number of copies you want.
d Press
Opciones de Copia (Copy Options)
and a or b to choose
Enlarge/Reduce.
Press OK.
e Press a or b to choose the enlargement
or reduction ratio you want.
Press OK.
NOTE
If you chose Custom(25-400%), enter
an enlargement or reduction ratio from
25% to 400%.
f If you do not want to change additional
settings, press
Inicio Negro (Black Start) or
Inicio Color (Color Start).
(DCP-T300, DCP-T500W and DCP-T700W)
7
a Load your document.
b Enter the number of copies you want.
c Press
Ampliar/Reducir (Enlarge/Reduce).
d Press a or b to choose the enlargement
or reduction ratio you want. Press OK.
NOTE
If you chose Custom(25-400%), press a
or b repeatedly to enter an enlargement or
reduction ratio from 25% to 400%.
198% 4" x6"iA4
186% 4" x6"iLTR
104% EX EiLTR
100%
97% LTR iA4
93% A4 iLTR
85% LTR iEXE
83% LGL iA4
78% LGL iLTR
46% LTR i4"x6"
Fit to Page
Custom(25-400%)