Brother DCP-T500W - Making Copies; How to Copy; Copy Settings

Making copies
27
7
2 in 1 ID copy (Page Layout) 7
You can copy both sides of your identification
card onto one page, keeping the original card
size. Make sure the paper size is set to
Letter or A4.
NOTE
You can copy an identification card to the
extent permitted under applicable laws.
(See Product Safety Guide: Legal
limitations for copying.)
a Place your identification card face down
near the left corner of the scanner glass
as shown in the illustration.
1 0.12 in. (3 mm) or greater (top, left)
2 8.5 in. (216 mm)
3 5.5 in. (140 mm)
4 scannable area
b (MFC model)
Press (COPIA (COPY)).
c Enter the number of copies you want.
d Press
Opciones de Copia (Copy Options)
and a or b to choose
Layout(2in1 ID) .
Press OK.
e Press a or b to choose 2in1(ID).
Press OK.
f Press Inicio Negro (Black Start) or
Inicio Color (Color Start).
The machine starts scanning one side of
the identification card.
g (MFC-T800W)
After the machine has scanned one
side, press 1. Turn over the
identification card and press OK to scan
the other side.
(DCP-T300, DCP-T500W and
DCP-T700W)
After the machine has scanned one
side, press a.
Turn over the identification card and
press OK to scan the other side.
NOTE
• Sort, Enlarge/Reduce - MFC-T800W
(Ampliar/Reducir (Enlarge/Reduce) -
DCP-T300, DCP-T500W and
DCP-T700W) and Remove Bkg. Clr
are not available with 2in1(ID).
• You can only make one color copy at a
time.
1
1
1
2
3
4
1