EasyManua.ls Logo

Brother DCP-T500W - 1 General Setup; Important Note; Memory Storage; Volume Settings (MFC Model Only)

Brother DCP-T500W
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
1
1
IMPORTANT NOTE 1
Most of the illustrations in this User's Guide show the MFC-T800W.
Memory Storage 1
Even if there is a power failure, you will not
lose your menu settings because they are
stored permanently. Temporary settings,
such as Overseas Mode, will be lost, and you
may have to reenter the date and time.
Volume Settings
(MFC model only)
1
Ring Volume 1
You can choose a range of ring volume
levels, from High to Off.
While the machine is idle, press d or c
to adjust the volume level. The LCD displays
the current setting, and each key press will
change the volume to the next level.
You can also change the volume through the
menu by following the instructions below:
Setting the Ring Volume from the
menu
1
a Press Me (Menu), 2, 4, 1.
b Press a or b to choose Low, Med, High
or Off.
Press OK.
c Press Detener/Salir (Stop/Exit).
General setup 1

Table of Contents

Other manuals for Brother DCP-T500W

Related product manuals