Brother FAX-2840 Service Manual

5-29
Confidential
1.3.19 Setting by country (Function code: 74)
<Function>
This function is used to customize the machine according to language, function settings, and
worker switch settings.
<Operating Procedure>
(1) Press the [7] and [4] buttons in this order in the initial state of the maintenance mode.
The country code currently set is displayed on the LCD.
(2) Enter the country code you want to set. This country code is displayed on the LCD.
(3) Press the [Start] button. The new setting is saved and "PARAMETER INIT" is displayed
on the LCD. The machine beeps for one second and returns to the initial state of the
maintenance mode.
Note:
• Be sure to perform this procedure after replacing the main PCB ASSY or rewriting the
firmware.
Note:
• The machine does not work normally when an incorrect country code is entered.
Memo:
• When the [Stop/Exit] button is pressed during the above procedure or when no button is
pressed for one minute, the operation is canceled, and the machine beeps for one
second and returns to the initial state of the maintenance mode. In this case, the modified
setting data is not saved.

Brother FAX-2840 Specifications

General

Group dial	8
Modem speed	33.6 Kbit/s
Color faxing	No
One-touch dials	22
Print technology	Laser
Fax compatibility	ITU-T G3
Fax coding methods	JBIG, MH, MMR (Fax coding method), MR
Fax resolution modes	Fine, Photo, Standard, Super Fine
Fax transmission speed	2.5 sec/page
Out-of-paper reception	400 pages
Error Correction Mode (ECM)	Yes
Fax speed dialing (max numbers)	200
Copier resize	25 - 400 %
Grayscale levels	256
Maximum copy resolution	300 x 600 DPI
Maximum number of copies	99 copies
N-in-1 copy function (N=)	2, 4
Copy speed (black, normal quality, A4)	20 cpm
Standard input capacity	250 sheets
Standard output capacity	100 sheets
Auto document feeder (ADF) input capacity	20 sheets
Supported media weight(s)	60 - 105 g/m²
Maximum standard media size	A4
ISO A-series sizes (A0...A9)	A4, A5, A6
Display number of lines	2 lines
Display number of characters	16
Processor family	ARM9
Processor frequency	200 MHz
Maximum internal memory	16 MB
Product color	Black, Grey
Sustainability certificates	ENERGY STAR
Noise level	53 dB
Noise level (idle)	30 dB
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	55 W
Power consumption (typical)	365 W
Power consumption (PowerSave)	1.5 W
Package weight	12900 g

Weight and Dimensions

Weight	9000 g
Dimensions (WxDxH)	368 x 360 x 311 mm