6 - 11
SETUP SEND
ZleMFC-US-FAX-4750e/5750e-
Setting Up Polling Transmit
Polling Transmit is when you set up your machine to wait with a document so
another fax machine can retrieve it.
1
Place the original face down in the ADF.
2
Press Menu, 2, 2, 7.
3
Press or to choose
POLLED TX:ON, and then press Set.
4
Press 1 to leave the originals waiting in
the document feeder—OR—Press 2 to
scan the document into memory.
5
Press 1 if you want to select additional settings. The LCD returns to the
SETUP SEND menu—OR—Press 2 if you are finished choosing settings and
go to Step 6.
6
Press Fax Start.
Note
If you pressed 1 in Step 4, the original remains in the ADF until your machine
is polled. If you must use your machine before the polled transmit occurs, you
must cancel this job.
7.POLLED TX
POLLED TX:OFF?
SELECT <- -> & SET
1.DOC 2.MEMORY
POLLED REPORT
DATE,TIME
DURATION
PAGE(S)
RESULT
MODE
04/01 15:20
00:00:23
01
OK
STANDARD
ECM
TIME : 04/01/2002 15:21
NAME : BROTHER
FAX : 908-XXX-XXXX
TEL : 908-XXX-XXXX
To Next Page
Loading...
