Brother HL-2250DN - User Manual

Other manuals for Brother HL-2250DN

Technical Reference Guide517 pages

Service Manual181 pages

Quick Setup Guide2 pages

Questions and Answers:

R
Rebecca GarnerSep 17, 2025
How to fix Brother HL-2250DN that cannot make print through duplex-printing?
- E
  Eric AndersonSep 18, 2025
  If your Brother printer is unable to perform duplex printing, start by checking the harness connection of the paper eject sensor PCB ASSY and reconnect it if necessary. The duplex tray itself might be faulty and need replacing. The back cover sensor could also be the cause, requiring replacement of the paper eject sensor PCB ASSY. In some instances, the main PCB might be the issue, necessitating replacement. Damaged DX gears could also prevent duplex printing, requiring replacement of the main frame L ASSY.
R
robinsonstevenSep 18, 2025
What to do if Pickup function of Paper tray does not work on Brother HL-2250DN?
- R
  Ryan CervantesSep 18, 2025
  If the paper tray's pickup function isn't working on your Brother printer, several components could be at fault. The link arm or the pick-up roller holder ASSY might be catching, requiring re-assembly. Check the harness connection of the main motor and reconnect if there's a failure. The plate-up gear (gear Z19M10 or lift gear 46), main motor, low voltage power supply PCB ASSY, or the main PCB might have failed and need replacement.
M
Melissa SullivanSep 18, 2025
How to troubleshoot no paper fed manual feed slot on Brother HL-2250DN?
- J
  John WhiteSep 18, 2025
  If your Brother printer isn't feeding paper from the manual feed slot, begin by inspecting the harness connection of the registration front/rear sensor PCB ASSY and reconnect it if necessary. A faulty low voltage power supply PCB ASSY or main PCB could also be the cause, both requiring replacement. The registration front/rear sensor itself might be failing; check its performance. If a problem is detected, replace the regist frame ASSY.
S
Sharon GreenSep 18, 2025
Why is my Brother HL-2250DN Printer double feeding?
- J
  Jason MolinaSep 18, 2025
  If your Brother printer is double feeding, the paper feeding kit may be failing and needs to be replaced.
D
Dr. Kylie PhillipsSep 18, 2025
How to resolve paper size error through duplex-printing on Brother Printer?
- A
  Anna BellSep 18, 2025
  If your Brother printer shows a paper size error during duplex printing, it could be due to the registration front actuator catching, which needs adjustment. Another potential cause is a failing main PCB that requires replacement.
J
Jason MaxwellSep 18, 2025
Why does Brother HL-2250DN Printer produce waves in the paper / folds in the paper at the eject roller?
- D
  Dr. Jennifer LewisSep 18, 2025
  If you notice waves or folds in the paper as it exits your Brother printer's eject roller, check for any foreign objects around the eject roller and remove them. If the problem persists, the eject roller itself may be failing, requiring replacement of the top cover ASSY.
N
Nicole MillerSep 18, 2025
How to fix wrinkles or creases on Brother Printer prints?
- J
  Julia WilliamsSep 18, 2025
  If your Brother printer is producing wrinkled or creased paper, a foreign object might be inside the fuser unit. Remove any foreign objects inside of the eject roller. If the issue continues, the fuser unit itself may be failing and require replacement.
S
Shawn GoodmanSep 19, 2025
Why is my Brother HL-2250DN Printer paper feeding at an angle?
- T
  turnerkimberlySep 22, 2025
  If your Brother printer is feeding paper at an angle, the main PCB might be failing and needs to be replaced.
M
Michael MaloneSep 22, 2025
Why is my Brother HL-2250DN Printer printing wrinkles or creases on the paper?
- M
  Mark GonzalesSep 22, 2025
  If your Brother printer is producing wrinkled or creased prints, it could be due to: * A foreign object inside the fuser unit. Remove it. * The fuser unit itself failing, requiring replacement.
E
Erin GriffithSep 22, 2025
What to do if my Brother All in One Printer displays 'Out of Memory'?
- B
  Brandon WilkinsSep 22, 2025
  If your Brother All in One Printer’s memory is full during fax sending or copying: Press Start to send or copy the scanned pages, or press Stop/Exit and wait for other operations to finish. You can also clear faxes from memory by printing them, then turn off Fax Storage. If a print operation is in process, reduce the print resolution or clear faxes from memory.

Brother HL-2250DN Specifications

General

Color	No
N-up printing	2, 4, 6, 25
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Economical printing	Yes
Time to first page (black, normal)	8.5 s
Print speed (black, normal quality, A4/US Letter)	26 ppm
Duplex print speed (black, normal quality, A4/US Letter)	5 ppm
Maximum internal memory	- MB
Sound power level (standby)	31 dB
Sound pressure level (printing)	53 dB
Total input capacity	250 sheets
Total output capacity	100 sheets
Total number of input trays	1
Maximum duty cycle	- pages per month
Page description languages	PCL 6
Custom media width	76.2 - 216 mm
Maximum print size	216 x 406 mm
Custom media length	116 - 406.4 mm
Paper tray media types	Bond paper, Plain paper, Recycled paper
Paper tray media weight	60 - 105 g/m²
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Multi-purpose tray media types	Bond paper, Envelopes, Heavyweight paper, Labels, Plain paper, Transparencies
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 163 g/m²
Sustainability certificates	ENERGY STAR
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	65 W
Power consumption (printing)	495 W
Power consumption (PowerSave)	0.9 W
Package weight	8300 g
Operating temperature (T-T)	10 - 32.5 °C
Operating relative humidity (H-H)	20 - 80 %
Standard interfaces	Ethernet, USB 2.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Mac operating systems supported	Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard
Server operating systems supported	Windows 2000 Advanced Server, Windows 2000 Server, Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64
Windows operating systems supported	Windows 2000 Professional, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64