To Next PageTo Next PageWhy is my Brother Laser printer showing PRINT OVERRUN error?
If your Brother Laser printer displays a 'PRINT OVERRUN' error, you can press Go to print the remaining data in the machine memory, or cancel the print job to delete the remaining data. You can also reduce the complexity of your document or lower the print resolution. Another option is to change the settings in the supplied Windows® driver.
What does CARTRIDGE ERROR mean on my Brother Laser printer?
If your Brother Laser printer is showing a 'CARTRIDGE ERROR', make sure the drum unit and toner cartridge assembly is installed properly.
What does DRUM END SOON mean on my Brother Laser printer?
If your Brother Laser printer displays the message 'DRUM END SOON', it means the drum unit will need to be replaced soon. Purchase a new drum unit to replace the current one.
What to do for DRUM ERROR on Brother Laser printer?
If your Brother Laser printer displays a 'DRUM ERROR', clean the corona wire. If the LEDs still show the same error after cleaning, replace the drum unit with a new one.
What to do if my Brother Laser printer says FRONT COVER OPEN?
If your Brother Laser printer indicates 'FRONT COVER OPEN', close the front cover of the machine.
What to do if my Brother Laser printer says FUSER COVER OPEN?
If your Brother Laser printer displays 'FUSER COVER OPEN', close the fuser cover located behind the back cover of the machine.
What does FUSER ERROR mean on my Brother Laser printer?
If the 'FUSER ERROR' message appears on your computer for your Brother Laser printer, turn the machine's power off, wait a few seconds, and then turn it on again. Leave the machine for 15 minutes with the power on.
Why does my Brother Laser printer say MANUAL FEED?
If your Brother Laser printer displays 'MANUAL FEED', it may be because the manual feed slot is empty; if so, put a piece of paper in it. Also, ensure you are using paper that meets Brother’s recommended paper specifications and load the same size paper that you selected in the current driver setting.
What does SIZE ERROR DX 1 mean on my Brother Laser printer?
If your Brother Laser printer shows 'SIZE ERROR DX 1', choose a paper size which is supported by the duplex tray.
Why is my Brother Laser printer not feeding paper from the manual feed slot?
If your Brother Laser printer is not feeding paper from the manual feed slot, put only one sheet of paper in the manual feed slot. Also, make sure that you have chosen Manual in Paper Source of the printer driver.
General| Color | No |
|---|---|
| N-up printing | 2, 4, 6, 25 |
| Print technology | Laser |
| Maximum resolution | 2400 x 600 DPI |
| Economical printing | Yes |
| Time to first page (black, normal) | 8.5 s |
| Print speed (black, normal quality, A4/US Letter) | 26 ppm |
| Duplex print speed (black, normal quality, A4/US Letter) | 5 ppm |
| Maximum internal memory | - MB |
| Sound power level (standby) | 31 dB |
| Sound pressure level (printing) | 53 dB |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Total number of input trays | 1 |
| Maximum duty cycle | - pages per month |
| Page description languages | PCL 6 |
| Custom media width | 76.2 - 216 mm |
| Maximum print size | 216 x 406 mm |
| Custom media length | 116 - 406.4 mm |
| Paper tray media types | Bond paper, Plain paper, Recycled paper |
| Paper tray media weight | 60 - 105 g/m² |
| Non-ISO print media sizes | Letter |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Multi-purpose tray media types | Bond paper, Envelopes, Heavyweight paper, Labels, Plain paper, Transparencies |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Sustainability certificates | ENERGY STAR |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 65 W |
| Power consumption (printing) | 495 W |
| Power consumption (PowerSave) | 0.9 W |
| Package weight | 8300 g |
| Operating temperature (T-T) | 10 - 32.5 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Standard interfaces | Ethernet, USB 2.0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Mac operating systems supported | Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard |
| Server operating systems supported | Windows 2000 Advanced Server, Windows 2000 Server, Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64 |
| Windows operating systems supported | Windows 2000 Professional, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64 |
Weight and Dimensions| Dimensions (WxDxH) | 368 x 360 x 183 mm |
|---|
