5-11
Security
When necessary, you can set a password to limit access to menus. This helps
prevent items from being changed accidentally.
• PanelSetProtect (default: No)
Select ‘ON’ to set a password.
• Change Password
Set a 4-digit password.
✏ Note
If you forget the password, reset the NV memory, refer to the previous page.
Basis Weight
Use this to adjust the paper quality settings.
• Plain paper 1 (default: Light 60-75 g/m
2
(16.0 to 20.0 lb))
Set plain paper 1 to ‘Light 60-75 g/m
2
’ (16.0 to 20.0 lb) or ‘Heavy 65-80 g/m
2
’
(17.3 to 21.3 lb).
• Plain paper 2 (default: Light 76-99 g/m
2
(20.2 to 26.3 lb))
Set plain paper 2 to ‘Light 76-99 g/m
2
’ (20.2 to 26.3 lb) or ‘Heavy 85-105 g/m
2
’
(22.6 to 28.0 lb).
ColorRegiCorrect
Use this to print the color registration adjustment chart. After setting up or moving
the printer, print the color registration adjustment chart and adjust the color
registration to ensure that colors are correctly aligned when printed.
✏ Note
The color registration chart is printed on A4 or Letter paper. (The requested paper
size depends on your country.) Set the A4 or Letter paper lengthwise into the paper
tray.
See
For details about this operation, refer to 1.1 “Adjusting Color Registration”.
To Next Page
Loading...
