Brother HL-4000CN - Setting the Gateway Address

1-8
 Setting the Gateway Address
Continued from the previous step
↓
TCP/IP
Subnet Mask
↓
21. Press the <
> button once.
TCP/IP
Gateway Address
↓
22. Press the <Form Feed/Set> or <
> button once.
Gateway Address
000.000.000.000*
↓
23. Set the gateway address in the same way as the IP
address. To set values with the <
> or < > buttons,
you can hold down the button to change the value
sequentially.
Gateway Address
192.168.001.254*
24. At this point, restart the printer.