1-5
Continued from the previous page.
↓
TCP/IP
Setup IP Address
↓
6. Press the <Form Feed/Set> or <
> button once.
Setup IP Address
DHCP *
The value currently set has a '*' displayed next to it.
↓
7. Press the <
> button once.
Setup IP Address
Panel *
↓
8. Press the <Form Feed/Set> button once.
Reboot system
To take effect
↓
3 seconds later, the following screen appears.
Setup IP Address
Panel *
When the value is set, a '*' appears next to it.
↓
9. Press the <Job Cancel/Back> or <
> button once.
The lower line of the screen returns to the ‘Setup IP
Address’.
Look
1Only restart the printer after setting the gateway
address at the last step. Continue to the next step
without restarting the printer.
To Next Page
Loading...
