Brother HL-5450DN - Page 31

25
Configuring your machine for a wireless network (For HL-5470DW(T) and HL-6180DW(T))
3
Note
Depending on your Authentication method, the Inner Authentication method selections differ.
l Choose encryption type TKIP or AES using a or b, and press OK.
Do one of the following:
If your Authentication method is EAP-TLS, go to step m.
For other Authentication methods, go to step n.
m The machine will display a list of available Client Certificates. Choose the certificate and go to step n.
n Choose the verification method No Verification, CA or CA + Server ID using a or b, and press
OK.
Do one of the following:
If you chose CA + Server ID, go to step o.
For other selections, go to step p.
Note
If you have not imported a CA certificate in your machine, the machine will display No Verification.
To import a CA certificate, see Using Certificates for device security uu page 66.
o Enter the server ID. (For information on how to enter text: uu Quick Setup Guide.) Go to step p.