Brother HL-5450DN - Function Table and Default Factory Settings; HL-5470 DW(T) and HL-6180 DW(T)

43
Control panel setup
4
Function table and default factory settings 4
HL-5470DW(T) and HL-6180DW(T) 4
Factory settings are shown in Bold with asterisk.
Main menu Submenu Menu Selections Options
Network Wired LAN TCP/IP Boot Method Auto*
Static
RARP
BOOTP
DHCP
IP Address
(000.000.000.000)*
1
Subnet Mask
(000.000.000.000)*
1
Gateway
(000.000.000.000)*
1
IP Boot Tries 0/1/2/3*.../32767
APIPA On*
Off
IPv6 On
Off*
Ethernet — Auto*
100B-FD
100B-HD
10B-FD
10B-HD
Wired Status — Active 1000B-FD
(For HL-6180DW(T))
Active 100B-FD
Active 100B-HD
Active 10B-FD
Active 10B-HD
Inactive
Wired OFF
MAC Address ——
Set to Default Restores wired network settings of the internal print server
to the factory default.
Wired Enable — On*
Off