45
Control panel setup
1
On connection to the network, the machine will automatically set the IP address and Subnet Mask to values appropriate for your network.
2
For details, please see the Wi-Fi Direct™ Guide located on the Manuals download page for your model on the Brother Solutions Center
(http://solutions.brother.com/
).
Network
(continued)
Wi-Fi Direct
2
Push Button ——
PIN Code ——
Manual ——
Group Owner — On
Off*
Device Info. Device Name —
SSID —
IP Address —
Status Info. Status G/O Active(**)
** = number of devices
Client Active
Not Connected
Off
Wired LAN Active
Signal Strong
Medium
Weak
None
(When Group Owner is On, the
signal is set to Strong.)
Channel —
Speed —
I/F Enable — On
Off*
Network Reset
Restores all network settings of the internal print server to the factory default.
Main menu Submenu Menu Selections Options
To Next Page
Loading...
