Brother HL-5450DN - Windows Driver Support

44
Control panel setup
4
Network
(continued)
WLAN TCP/IP Boot Method Auto*
Static
RARP
BOOTP
DHCP
IP Address
(000.000.000.000)*
1
Subnet Mask
(000.000.000.000)*
1
Gateway
(000.000.000.000)*
1
IP Boot Tries 0/1/2/3*.../32767
APIPA On*
Off
IPv6 On
Off*
Setup Wizard ——
WPS/AOSS ——
WPS w/PIN Code ——
WLAN Status Status Active(11n)
Active(11b)
Active(11g)
Wired LAN Active
WLAN OFF
AOSS Active
Connection Fail
Signal (Appears only when
WLAN Enable is On.)
Channel
Speed
SSID
Comm. Mode Ad-hoc
Infrastructure
MAC Address ——
Set to Default Restores wireless network settings of the internal print
server to the factory default.
WLAN Enable — On
Off*
Main menu Submenu Menu Selections Options