G - 2 GLOSSARY
Communication error (or Comm. Error) An error during fax
sending or receiving, usually caused by line noise or static.
Compatibility group The ability of one fax unit to communicate
with another. Compatibility is assured between ITU-T Groups.
Contrast Setting to compensate for dark or light documents, by
making faxes or copies of dark documents lighter and light
documents darker.
Colour Enhancement (MFC-410CN only) Adjusts the colour in the
image for better print quality by improving sharpness, white
balance and colour density.
Delayed Fax (MFC-410CN only) Sends your fax at a specified later
time that day.
Dual Access Your MFC can scan outgoing faxes or scheduled jobs
into memory at the same time it is sending a fax or receiving or
printing an incoming fax.
ECM (Error Correction Mode) Detects errors during fax
transmission and resends the pages of the fax that had an error.
Extension phone A telephone on the fax number that is plugged
into a separate wall socket.
External phone A TAD (telephone answering device) or telephone
that is connected to your MFC.
F/T Ring Time The length of time that the Brother MFC rings (when
the Receive Mode setting is Fax/Tel) to notify you to pick up a
voice call that it answered.
FaxAbility A subscriber service purchased from the telephone
company that provides another phone number on an existing
phone line. The Brother fax machine uses the new number to
simulate a dedicated fax line.
Fax Detect Enables your MFC to respond to CNG tones if you
interrupt a fax call by answering it.
Fax Forwarding (MFC-410CN only) Sends a fax received into the
memory to another pre-programmed fax number.
Fax Journal Lists information about the last 200 incoming and
outgoing faxes. TX means Transmit. RX means Receive.