Brother MFC-210C User Manual

INTRODUCTION 1 - 3
9
Colour Start
Lets you start sending faxes or
make copies in full colour.
Also lets you start a scanning
operation (in colour or mono,
depending on the scanning setting
on your PC).
<
Stop/Exit
Stops an operation or exits from the
menu.
A
Navigation keys:
Menu/Set
The same key is used for Menu and
Set operations.
Lets you access the Menu to
program and store your settings in
the MFC.
When using the speaker or during
ringing in fax mode, you can press
these keys to adjust the volume.
▲
Search/Speed Dial
Lets you look up numbers that are
stored in the dialling memory. It also
lets you dial stored numbers by
pressing # and a two-digit number.
Press to scroll backward to a menu
selection.
▲
or
▼
Press to scroll through the menus
and options.
B
Liquid Crystal Display (LCD)
Displays messages on the screen to
help you set up and use your MFC.
The LCD examples in this guide are
for models with a two-line display.
There may be slight differences
between the examples provided
and models with a one-line display.
C
Power Save
You can turn the MFC to power
save condition.
▲

Brother MFC-210C Specifications

General

Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
Maximum resolution	1200 x 6000 DPI
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	15 ppm
Faxing	No
Modem speed	14.4 Kbit/s
Copy speed (black, normal quality, A4)	17 cpm
Copy speed (color, normal quality, A4)	11 cpm
Scan speed	4 sec/page
Dimensions (WxDxH)	373 x 453 x 135 mm
Color all-in-one functions	copy, print, scan
Grayscale levels	256
Optical scanning resolution	600 x 2400 DPI
Number of print cartridges	4
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Total input capacity	100 sheets
Total output capacity	25 sheets
Market positioning	Home & office