To Next Page
L
Lisa PaulAug 25, 2025
What to do if my Brother Printer says 'Toner Ended'?
- Mmiguel06Aug 26, 2025
If your Brother printer displays 'TONER ENDED', replace the toner cartridge with a new one.
What to do if my Brother Printer says 'Toner Ended'?
If your Brother printer displays 'TONER ENDED', replace the toner cartridge with a new one.
Why Brother All in One Printer cannot print or scan over the network?
If your Brother All in One Printer cannot print or scan over the network, there might be an issue with your security software. Please, check your security software settings. Also, verify that the IP addresses and Subnet Masks of both your computer and the Brother machine are correct and on the same network. If you are using Windows, you can use the Network Connection Repair Tool to fix the Brother machine’s network settings by assigning the correct IP address and Subnet Mask. Note that you must log on with Administrator privileges and ensure that the Brother machine is turned on and connected to your computer.
What to do if Brother MFC-7360N is not found on network during MFL-Pro Suite installation?
If the Brother machine is not found on the network during the MFL-Pro Suite installation, choose to search for the Brother machine again on the installer dialog. Allow access when the alert message of the security software appears during the MFL-Pro Suite installation. Place your Brother machine within about 3.3 feet (1 meter) from the WLAN access point/router when you configure the wireless network settings. Also, move your Brother machine to an obstruction-free area, or closer to the WLAN access point/router and move all the devices away from the Brother machine or WLAN access point/router.
What to do if previous printing job failed on Brother MFC-7360N?
If your previous printing job failed on your Brother All in One Printer, delete it from the print queue of your computer. To do this: * Double-click the printer icon in the appropriate folder for your operating system: * (Windows® 2000) Start, Settings, and then Printers. * (Windows® XP) Start and Printers and Faxes. * (Windows Vista®) Control Panel, Hardware and Sound, and then Printers. * (Windows® 7) Control Panel, Devices and Printers, and then Printers and Faxes. Then, choose the Cancel All Documents option in the Printer menu.
What to do if my Brother MFC-7360N says 'Replace Toner'?
If your Brother All in One Printer shows 'Replace Toner', the machine will stop printing until you replace the toner cartridge. If you have set the Toner setting to Stop, replace the toner cartridge with a new and unused original Brother toner cartridge to reset the Replace Toner mode. If you have set the Toner setting to Continue, the machine will continue to print data until the LCD shows Toner Ended.
How to fix 'Replace Drum' error on Brother MFC-7360N?
If your Brother All in One Printer displays 'Replace Drum', it means it is time to replace the drum unit. Replace the drum unit.
How to fix cartridge error on Brother All in One Printer?
A cartridge error on your Brother All in One Printer often means the toner cartridge isn't correctly installed. To fix this, pull out the drum unit, remove the toner cartridge, and then reinstall it into the drum unit.
What to do if Brother MFC-7360N All in One Printer says no paper?
If your Brother All in One Printer displays a 'No Paper' error, it means the printer is out of paper or the paper isn't correctly loaded. Refill the paper in the paper tray and press Start, or remove the paper and load it again, then press Start. If the issue continues, the paper pick-up roller may need cleaning.
What does toner low mean on Brother MFC-7360N All in One Printer?
When your Brother All in One Printer shows 'Toner Low', it means you'll need to replace the toner cartridge soon. Purchase a new toner cartridge before you get a 'Replace Toner' message.
How to fix cover is open error on Brother MFC-7360N?
If your Brother All in One Printer displays 'Cover is Open', the front cover is not completely closed. Close the front cover of the machine.
General| Duplex printing | No |
|---|---|
| Print technology | Laser |
| Maximum resolution | 2400 x 600 DPI |
| Time to first page (black, normal) | 8.5 s |
| Print speed (black, normal quality, A4/US Letter) | 24 ppm |
| Scan to | E-mail, File, Image, OCR |
| Grayscale levels | 256 |
| Input color depth | 48 bit |
| Image formats supported | BMP, JPG, PNG, TIF |
| Maximum scan resolution | 19200 x 19200 DPI |
| Optical scanning resolution | 600 x 2400 DPI |
| Copier resize | 25 - 400 % |
| PC free copying | Yes |
| Maximum copy resolution | 600 x 600 DPI |
| Time to first copy (black, normal) | 11 s |
| Copy speed (black, normal quality, A4) | 24 cpm |
| Dimensions (WxDxH) | 405 x 399 x 316 mm |
| All-in-one functions | Copy, Fax, Print, Scan |
| Compatible operating systems | Linux Mac OS X 10.4.11, 10.5.x, 10.6x Windows 7, Vista, XP, 2000 |
| Faxing | Mono faxing |
| Fax memory | 400 pages |
| Modem speed | 14.4 Kbit/s |
| Fax speed dialing (max numbers) | 208 |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Total number of input trays | 1 |
| Auto document feeder (ADF) input capacity | 35 sheets |
| Internal memory | 32 MB |
| Processor family | ARM |
| Compatible memory cards | Not supported |
| Sound power level (standby) | 30 dB |
| Sound pressure level (printing) | 53 dB |
| Display | LCD |
| Market positioning | Home & office |
| Display number of lines | 2 lines |
| Display number of characters | 16 |
| Maximum print size | 216 x 356 mm |
| Media weight (tray 1) | 60 - 105g/m2 |
| Paper tray media types | Bond paper, Envelopes, Labels, Plain paper, Recycled paper |
| Non-ISO print media sizes | Executive |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| JIS B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Supported network protocols (IPv4) | TCP/IP (IPv4 & IPv6) |
| Direct printing | - |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Power consumption (standby) | 0.9 W |
| Power consumption (PowerSave) | 65 W |
| Power consumption (average operating) | 495 W |
| Package weight | 14800 g |
| Sustainability certificates | ENERGY STAR |
| Maximum duty cycle | 10000 pages per month |
