Brother MFC-7440N

154
5.LAN
(MFC-
7840W
only)
(continued)
2.WLAN
(continued)
1.TCP/IP
(continued)
8.DNS Server (Primary)
000.000.000.
000
(Secondary)
000.000.000.
000
Specifies the IP address
of the primary or
secondary DNS server.
See
Network
User’s
Guide
on the
CD-ROM.
9.APIPA On*
Off
Automatically allocates
the IP address from the
link-local address range.
0.IPv6 On
Off*
Enable or Disable the
IPv6 protocol. If you
want to use the IPv6
protocol, visit
http://solutions.brother.com/
for more information.
2.Setup Wizard 1.On
2.Off
— You can configure your
print server.
3.SES/WPS/
AOSS
1.On
2.Off
— You can easily configure
your wireless network
settings using the one-
button push method.
4.WPS
w/PIN C
ode
1.On
2.Off
— You can easily configure
your wireless network
settings using WPS with
a PIN code.
5.WLAN Status 1.Status Active(11b)
Active(11g)
Wired LAN Active
WLAN OFF
Connection
error
You can see the current
wireless network status.
2.Signal
1
Strong
Medium
Weak
None
You can see the current
wireless network signal
strength.
3.SSID
1
— You can see the current
SSID.
4.Comm. Mode
1
Ad-hoc
Infrastructure
You can see the current
Communication Mode.
The factory settings are shown in Bold with an asterisk.
1
This setting only appears when WLAN Enable is On.
Main
Menu
Submenu Menu Selections Options Descriptions Page