What does 'Fuser Error' mean on my Brother MFC-7860DW All in One Printer?
If your Brother All in One Printer displays 'Fuser Error', it means the temperature of the fuser unit did not rise to the specified temperature within the specified time. Turn the power off, wait a few seconds, then turn it back on and leave the machine on for 15 minutes.
What does 'No Response/Busy' mean on my Brother MFC-7860DW All in One Printer?
If your Brother All in One Printer displays 'No Response/Busy', it means the number you dialed did not answer or is busy. Verify the number and try again.
What does 'Not Available' mean on my Brother All in One Printer?
If your Brother All in One Printer displays 'Not Available', it means the requested function is not permitted to all IDs by Secure Function Lock 2.0. Contact your administrator to check your Secure Function Lock Settings.
What does 'Size Error DX' mean on my Brother All in One Printer?
If your Brother All in One Printer displays 'Size Error DX', it means the paper in the tray is not a suitable size for automatic duplex printing. Load either Letter, Legal or Folio paper for automatic duplex printing, and then press Start.
What does 'Manual Feed' mean on my Brother All in One Printer?
If your Brother All in One Printer displays 'Manual Feed', it means Manual Feed was selected as the paper source when there was no paper in the manual feed slot. Place a sheet of paper in the manual feed slot.
What does 'DR Mode in Use' mean on my Brother All in One Printer?
If your Brother All in One Printer displays 'DR Mode in Use', it means the machine is set to Distinctive Ring mode, and you cannot change the Receive Mode from Manual to another mode. Set Distinctive Ring to Off.
What does 'Limit Exceeded' mean on my Brother MFC-7860DW All in One Printer?
If your Brother All in One Printer displays 'Limit Exceeded', it means the Page Limit set in Secure Function Lock 2.0 for your ID was reached. Contact your administrator to check your Secure Function Lock Settings.
How to fix 'Cartridge Error' on a Brother MFC-7860DW All in One Printer?
If you're seeing a 'Cartridge Error' on your Brother All in One Printer, the toner cartridge might not be installed correctly. Pull out the drum unit, remove the toner cartridge, and then reinstall it into the drum unit.
What to do if my Brother MFC-7860DW says 'Cover is Open'?
The 'Cover is Open' error on your Brother All in One Printer indicates that a cover is not completely closed. Here's what to check: - Ensure the front cover is fully closed. - Ensure the ADF cover is fully closed. - If loading a document, close the ADF cover and press Stop/Exit. - Ensure the fuser cover is closed, especially after a paper jam.
Why does my Brother MFC-7860DW All in One Printer say 'No Toner'?
If your Brother All in One Printer displays 'No Toner', the toner cartridge might not be installed correctly. Pull out the drum unit, remove the toner cartridge, and then reinsert it back into the drum unit.
General| Secure printing | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 2400 x 600 DPI |
| Time to first page (black, normal) | 9 s |
| Print speed (black, normal quality, A4/US Letter) | 26 ppm |
| Duplex print speed (black, normal quality, A4/US Letter) | 5 ppm |
| Scan to | E-mail, E-mail Server, File, FTP, Image, OCR |
| Scanner type | Flatbed & ADF scanner |
| Grayscale levels | 256 |
| Input color depth | 48 bit |
| Output color depth | 24 bit |
| Image formats supported | BMP, JPG, TIF |
| Maximum scan resolution | 19200 x 19200 DPI |
| Optical scanning resolution | 600 x 2400 DPI |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | 600 x 600 DPI |
| Maximum number of copies | 99 copies |
| N-in-1 copy function (N=) | 2, 4 |
| Time to first copy (black, normal) | 11 s |
| Copy speed (black, normal quality, A4) | 26 cpm |
| Faxing | Mono faxing |
| Fax memory | 500 pages |
| Modem speed | 33.6 Kbit/s |
| Fax coding methods | JBIG, MH, MMR (Fax coding method), MR |
| Fax speed dialing (max numbers) | 200 |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Auto document feeder (ADF) input capacity | 35 sheets |
| Display | LCD |
| Market positioning | Home & office |
| Display number of lines | 2 lines |
| Display number of characters | 16 |
| Internal memory | 32 MB |
| Processor family | ARM |
| Processor frequency | 200 MHz |
| Card reader integrated | No |
| Sound pressure level (copying) | 53 dB |
| Sound pressure level (printing) | 30 dB |
| Custom media width | 76.2 - 216 mm |
| Maximum print size | 216 x 406 mm |
| Custom media length | 116 - 406.4 mm |
| Paper tray media types | Bond paper, Envelopes, Labels, Plain paper, Recycled paper |
| Paper tray media weight | 60 - 105 g/m² |
| Non-ISO print media sizes | Letter |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Auto Document Feeder (ADF) media weight | 64 - 90 g/m² |
| Security algorithms | 128-bit WEP, 64-bit WEP, WPA-AES, WPA-PSK, WPA-TKIP, WPA2-PSK |
| Dimensions (WxDxH) | 527 x 510 x 493 mm |
| All-in-one functions | Copy, Fax, Print, Scan |
| Color all-in-one functions | Scan |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | 1 |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 55 W |
| Power consumption (PowerSave) | 0.9 W |
| Power consumption (average operating) | 445 W |
| Sustainability certificates | ENERGY STAR |
| Maximum duty cycle | - pages per month |
| Package weight | 11600 g |
Weight and Dimensions| Weight | 14800 g |
|---|
To Next Page
