To Next Page
J
Jacob HuangSep 12, 2025
What is drum error on Brother MFC-7860DW?
- NNathaniel ValentineSep 12, 2025
A 'Drum Error' on your Brother All in One Printer means the corona wire on the drum unit needs cleaning. Clean the corona wire on the drum unit.
What is drum error on Brother MFC-7860DW?
A 'Drum Error' on your Brother All in One Printer means the corona wire on the drum unit needs cleaning. Clean the corona wire on the drum unit.
What does init unable XX mean on Brother All in One Printer?
If your Brother All in One Printer displays 'Init Unable XX', the machine has a mechanical problem. Disconnect the machine from the power for several minutes and then reconnect it.
What does EL error mean on Brother All in One Printer?
If your Brother All in One Printer displays an 'EL Error', the machine has a mechanical problem. Open the front cover and close it again.
Why does my Brother MFC-7860DW All in One Printer say manual feed?
The 'Manual Feed' message on your Brother All in One Printer means manual feed was selected as the paper source, but there's no paper in the manual feed slot. Place a sheet of paper in the manual feed slot.
How to fix no toner error on Brother MFC-7860DW All in One Printer?
If your Brother All in One Printer displays 'No Toner', the toner cartridge isn't correctly installed. Pull out the drum unit, remove the toner cartridge, and then put it back into the drum unit.
What does size error DX mean on Brother MFC-7860DW?
If your Brother All in One Printer displays 'Size Error DX', the paper in the tray isn't suitable for automatic duplex printing. Load A4 paper for automatic duplex printing, and then press Start.
What does drum stop mean on Brother MFC-7860DW All in One Printer?
The message 'Drum Stop' on your Brother All in One Printer indicates that it is time to replace the drum unit.
What to do if my Brother MFC-7860DW All in One Printer says 'No Paper'?
If your Brother All in One Printer displays a 'No Paper' error, it means the printer is either out of paper or the paper isn't loaded correctly. You can refill the paper in the tray and press Start, or remove the paper and load it again, then press Start.
How to fix a 'Cartridge Error' on my Brother MFC-7860DW All in One Printer?
If your Brother All in One Printer shows a 'Cartridge Error', it means the toner cartridge might not be installed properly. To fix this, pull out the drum unit, remove the toner cartridge, and then reinstall the toner cartridge back into the drum unit.
What does 'Cover is Open' mean on my Brother MFC-7860DW and how do I fix it?
The 'Cover is Open' error on your Brother All in One Printer indicates that one of the covers isn't fully closed. Make sure the front cover, the ADF cover, and the fuser cover are all completely closed. Also, check for any paper jams at the back of the machine.
General| Secure printing | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 2400 x 600 DPI |
| Time to first page (black, normal) | 9 s |
| Print speed (black, normal quality, A4/US Letter) | 26 ppm |
| Duplex print speed (black, normal quality, A4/US Letter) | 5 ppm |
| Scan to | E-mail, E-mail Server, File, FTP, Image, OCR |
| Scanner type | Flatbed & ADF scanner |
| Grayscale levels | 256 |
| Input color depth | 48 bit |
| Output color depth | 24 bit |
| Image formats supported | BMP, JPG, TIF |
| Maximum scan resolution | 19200 x 19200 DPI |
| Optical scanning resolution | 600 x 2400 DPI |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | 600 x 600 DPI |
| Maximum number of copies | 99 copies |
| N-in-1 copy function (N=) | 2, 4 |
| Time to first copy (black, normal) | 11 s |
| Copy speed (black, normal quality, A4) | 26 cpm |
| Faxing | Mono faxing |
| Fax memory | 500 pages |
| Modem speed | 33.6 Kbit/s |
| Fax coding methods | JBIG, MH, MMR (Fax coding method), MR |
| Fax speed dialing (max numbers) | 200 |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Auto document feeder (ADF) input capacity | 35 sheets |
| Display | LCD |
| Market positioning | Home & office |
| Display number of lines | 2 lines |
| Display number of characters | 16 |
| Internal memory | 32 MB |
| Processor family | ARM |
| Processor frequency | 200 MHz |
| Card reader integrated | No |
| Sound pressure level (copying) | 53 dB |
| Sound pressure level (printing) | 30 dB |
| Custom media width | 76.2 - 216 mm |
| Maximum print size | 216 x 406 mm |
| Custom media length | 116 - 406.4 mm |
| Paper tray media types | Bond paper, Envelopes, Labels, Plain paper, Recycled paper |
| Paper tray media weight | 60 - 105 g/m² |
| Non-ISO print media sizes | Letter |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Auto Document Feeder (ADF) media weight | 64 - 90 g/m² |
| Security algorithms | 128-bit WEP, 64-bit WEP, WPA-AES, WPA-PSK, WPA-TKIP, WPA2-PSK |
| Dimensions (WxDxH) | 527 x 510 x 493 mm |
| All-in-one functions | Copy, Fax, Print, Scan |
| Color all-in-one functions | Scan |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | 1 |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 55 W |
| Power consumption (PowerSave) | 0.9 W |
| Power consumption (average operating) | 445 W |
| Sustainability certificates | ENERGY STAR |
| Maximum duty cycle | - pages per month |
| Package weight | 11600 g |
Weight and Dimensions| Weight | 14800 g |
|---|
