What does 'No Toner' mean on my Brother All in One Printer?
If your Brother All in One Printer displays 'No Toner', it means the toner cartridge is not installed correctly. Pull out the drum unit, remove the toner cartridge, and then put it back into the drum unit.
Why is duplex disabled on my Brother MFC-7860DW All in One Printer?
If 'Duplex Disabled' appears on your Brother All in One Printer, it means the duplex tray is either removed or not correctly installed. Make sure to carefully put the duplex tray into the machine until it clicks into place. Also, ensure that the back of the machine is completely closed.
What does 'Disconnected' mean on my Brother MFC-7860DW All in One Printer and how to solve it?
If your Brother All in One Printer displays 'Disconnected', it means the other person or other person’s fax machine stopped the call. Try to send or receive again.
What does 'Toner Low' mean on my Brother MFC-7860DW All in One Printer?
If your Brother All in One Printer is displaying 'Toner Low', it means the toner is running low. It's recommended to purchase a new toner cartridge to have on hand before you receive a 'Replace Toner' message.
How do I fix a 'Drum Error' on my Brother All in One Printer?
If your Brother All in One Printer is showing a 'Drum Error', it indicates that the corona wire on the drum unit needs cleaning. Clean the corona wire on the drum unit to resolve this issue.
Why does my Brother MFC-7860DW All in One Printer say 'No Paper'?
If your Brother All in One Printer displays 'No Paper', it means the printer is out of paper or the paper isn't loaded correctly. You can either refill the paper tray and press Start, or remove the paper and reload it before pressing Start again. If the problem continues, the paper pick-up roller may need cleaning.
What causes 'Document Jam' on Brother MFC-7860DW All in One Printer?
A 'Document Jam' error on your Brother All in One Printer means the document wasn't inserted or fed correctly, or the document scanned from the ADF was too long.
How to fix 'Cartridge Error' on a Brother MFC-7860DW All in One Printer?
If you're seeing a 'Cartridge Error' on your Brother All in One Printer, the toner cartridge might not be installed correctly. Pull out the drum unit, remove the toner cartridge, and then reinstall it into the drum unit.
Why does my Brother MFC-7860DW All in One Printer say 'Manual Feed'?
The 'Manual Feed' message on your Brother All in One Printer appears when Manual Feed is selected as the paper source, but there's no paper in the manual feed slot. Place a sheet of paper in the manual feed slot.
Why does my Brother All in One Printer say cooling down wait for a while?
If your Brother All in One Printer displays 'Cooling Down Wait for a while', the drum unit or toner cartridge is too hot, and the machine has paused to cool down. Ensure the fan is spinning and the exhaust outlet isn't blocked. If the fan works, clear any obstructions around the exhaust and let the machine sit powered on for several minutes. If the fan isn't spinning, disconnect and reconnect the machine to power.
General| Secure printing | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 2400 x 600 DPI |
| Time to first page (black, normal) | 9 s |
| Print speed (black, normal quality, A4/US Letter) | 26 ppm |
| Duplex print speed (black, normal quality, A4/US Letter) | 5 ppm |
| Scan to | E-mail, E-mail Server, File, FTP, Image, OCR |
| Scanner type | Flatbed & ADF scanner |
| Grayscale levels | 256 |
| Input color depth | 48 bit |
| Output color depth | 24 bit |
| Image formats supported | BMP, JPG, TIF |
| Maximum scan resolution | 19200 x 19200 DPI |
| Optical scanning resolution | 600 x 2400 DPI |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | 600 x 600 DPI |
| Maximum number of copies | 99 copies |
| N-in-1 copy function (N=) | 2, 4 |
| Time to first copy (black, normal) | 11 s |
| Copy speed (black, normal quality, A4) | 26 cpm |
| Faxing | Mono faxing |
| Fax memory | 500 pages |
| Modem speed | 33.6 Kbit/s |
| Fax coding methods | JBIG, MH, MMR (Fax coding method), MR |
| Fax speed dialing (max numbers) | 200 |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Auto document feeder (ADF) input capacity | 35 sheets |
| Display | LCD |
| Market positioning | Home & office |
| Display number of lines | 2 lines |
| Display number of characters | 16 |
| Internal memory | 32 MB |
| Processor family | ARM |
| Processor frequency | 200 MHz |
| Card reader integrated | No |
| Sound pressure level (copying) | 53 dB |
| Sound pressure level (printing) | 30 dB |
| Custom media width | 76.2 - 216 mm |
| Maximum print size | 216 x 406 mm |
| Custom media length | 116 - 406.4 mm |
| Paper tray media types | Bond paper, Envelopes, Labels, Plain paper, Recycled paper |
| Paper tray media weight | 60 - 105 g/m² |
| Non-ISO print media sizes | Letter |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Auto Document Feeder (ADF) media weight | 64 - 90 g/m² |
| Security algorithms | 128-bit WEP, 64-bit WEP, WPA-AES, WPA-PSK, WPA-TKIP, WPA2-PSK |
| Dimensions (WxDxH) | 527 x 510 x 493 mm |
| All-in-one functions | Copy, Fax, Print, Scan |
| Color all-in-one functions | Scan |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | 1 |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 55 W |
| Power consumption (PowerSave) | 0.9 W |
| Power consumption (average operating) | 445 W |
| Sustainability certificates | ENERGY STAR |
| Maximum duty cycle | - pages per month |
| Package weight | 11600 g |
Weight and Dimensions| Weight | 14800 g |
|---|
To Next Page
