What does 'Limit Exceeded' mean on my Brother All in One Printer and how to resolve it?
If your Brother All in One Printer displays 'Limit Exceeded', it means the Page Limit set in Secure Function Lock 2.0 for your ID has been reached. Contact your administrator to check your Secure Function Lock Settings.
What to do if my Brother MFC-7860DW All in One Printer says 'Replace Toner'?
If your Brother All in One Printer shows 'Replace Toner', the machine will stop printing until you replace the toner cartridge. If you have set the Toner setting to Stop, replace the toner cartridge with a new and unused original Brother toner cartridge to reset the Replace Toner mode. If you have set the Toner setting to Continue, the machine will continue to print data until the LCD shows Toner Ended.
How to activate wireless setting on Brother MFC-7860DW All in One Printer?
To fix this, turn the wireless setting to ON. If a LAN cable is connected, disconnect it and then turn the wireless setting ON. 1. Press Menu, then 6 (Network), then 2 (WLAN), then 2 (Setup Wizard). 2. When 'WLAN Enable?' appears, press 1 to select 'On'. This will initiate the wireless setup wizard.
What does 'Duplex Disabled 1' mean on my Brother Printer?
If your Brother printer is displaying 'DUPLEX DISABLED 1', close the back cover of the printer and put the duplex tray back in.
Brother MFC-7860DW does not print or scan after troubleshooting, what to do?
If you have checked and tried all of the above, however the Brother All in One machine does not print/scan, uninstall the MFL-Pro Suite and reinstall it.
How to fix 'No Toner' error on Brother MFC-7860DW?
If your Brother All in One Printer displays a 'No Toner' error, it means the toner cartridge is not installed correctly. To fix this, pull out the drum unit, take out the toner cartridge, and then put it back into the drum unit.
What does 'Fuser Error' mean on my Brother MFC-7860DW All in One Printer?
If your Brother All in One Printer displays 'Fuser Error', it means the temperature of the fuser unit did not rise to the specified temperature within the specified time. Turn the power off, wait a few seconds, then turn it back on and leave the machine on for 15 minutes.
What does 'Toner Ended' mean on my Brother All in One Printer?
If your Brother All in One Printer displays 'Toner Ended', it means it is time to replace the toner cartridge with a new one.
What does 'Size Error DX' mean on my Brother All in One Printer and how to resolve it?
If your Brother All in One Printer displays 'Size Error DX', it means the paper in the tray is not a suitable size for automatic duplex printing. Load A4 paper for automatic duplex printing, and then press Start.
What to do if my Brother Printer says 'No Toner'?
If your Brother printer is displaying a 'NO TONER' message, open the front cover and install the toner cartridge.
General| Secure printing | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 2400 x 600 DPI |
| Time to first page (black, normal) | 9 s |
| Print speed (black, normal quality, A4/US Letter) | 26 ppm |
| Duplex print speed (black, normal quality, A4/US Letter) | 5 ppm |
| Scan to | E-mail, E-mail Server, File, FTP, Image, OCR |
| Scanner type | Flatbed & ADF scanner |
| Grayscale levels | 256 |
| Input color depth | 48 bit |
| Output color depth | 24 bit |
| Image formats supported | BMP, JPG, TIF |
| Maximum scan resolution | 19200 x 19200 DPI |
| Optical scanning resolution | 600 x 2400 DPI |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | 600 x 600 DPI |
| Maximum number of copies | 99 copies |
| N-in-1 copy function (N=) | 2, 4 |
| Time to first copy (black, normal) | 11 s |
| Copy speed (black, normal quality, A4) | 26 cpm |
| Faxing | Mono faxing |
| Fax memory | 500 pages |
| Modem speed | 33.6 Kbit/s |
| Fax coding methods | JBIG, MH, MMR (Fax coding method), MR |
| Fax speed dialing (max numbers) | 200 |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Auto document feeder (ADF) input capacity | 35 sheets |
| Display | LCD |
| Market positioning | Home & office |
| Display number of lines | 2 lines |
| Display number of characters | 16 |
| Internal memory | 32 MB |
| Processor family | ARM |
| Processor frequency | 200 MHz |
| Card reader integrated | No |
| Sound pressure level (copying) | 53 dB |
| Sound pressure level (printing) | 30 dB |
| Custom media width | 76.2 - 216 mm |
| Maximum print size | 216 x 406 mm |
| Custom media length | 116 - 406.4 mm |
| Paper tray media types | Bond paper, Envelopes, Labels, Plain paper, Recycled paper |
| Paper tray media weight | 60 - 105 g/m² |
| Non-ISO print media sizes | Letter |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Auto Document Feeder (ADF) media weight | 64 - 90 g/m² |
| Security algorithms | 128-bit WEP, 64-bit WEP, WPA-AES, WPA-PSK, WPA-TKIP, WPA2-PSK |
| Dimensions (WxDxH) | 527 x 510 x 493 mm |
| All-in-one functions | Copy, Fax, Print, Scan |
| Color all-in-one functions | Scan |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | 1 |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 55 W |
| Power consumption (PowerSave) | 0.9 W |
| Power consumption (average operating) | 445 W |
| Sustainability certificates | ENERGY STAR |
| Maximum duty cycle | - pages per month |
| Package weight | 11600 g |
Weight and Dimensions| Weight | 14800 g |
|---|
To Next Page
