What to do if my Brother Printer says 'JAM TRAY 1 JAM INSIDE JAM REAR JAM DUPLEX 1'?
If your Brother printer is showing a 'JAM TRAY 1 JAM INSIDE JAM REAR JAM DUPLEX 1' error, this indicates a paper jam in one of those areas. You should clear the jammed paper from the area indicated.
Why does my Brother Printer say 'No Paper T1'?
If your Brother printer displays a 'No Paper T1' error, it could be due to several reasons. The paper tray might be empty or not correctly installed; if it’s empty, add a new stack of paper and press Go. Even if there is paper, ensure it is straight and not curled—straighten if necessary. Try removing the paper, turning the stack over, and placing it back in the tray. Reduce the amount of paper in the tray. Also, verify that the paper meets Brother’s recommended specifications and that you've loaded the same size paper selected in the driver settings. If the problem persists, the paper pick-up roller may be dirty and needs cleaning.
What does 'Toner Ended' mean on my Brother All in One Printer and how to resolve it?
The 'Toner Ended' message on your Brother All in One Printer means it is time to replace the toner cartridge. Replace the toner cartridge with a new one to resolve this.
What does 'Toner Ended' mean on my Brother All in One Printer?
If your Brother All in One Printer displays 'Toner Ended', it means it is time to replace the toner cartridge with a new one.
How to fix 'Drum Error' on Brother All in One Printer?
If your Brother All in One Printer displays 'Drum Error', it indicates that the corona wire on the drum unit needs to be cleaned. Clean the corona wire on the drum unit to resolve this issue.
What to do if my Brother MFC-7860DW All in One Printer says 'No Paper'?
If your Brother All in One Printer displays a 'No Paper' error, it means the printer is either out of paper or the paper isn't loaded correctly. You can refill the paper in the tray and press Start, or remove the paper and load it again, then press Start.
What does 'No Response/Busy' mean on my Brother MFC-7860DW All in One Printer?
If your Brother All in One Printer displays 'No Response/Busy', it means the number you dialed did not answer or is busy. Verify the number and try again.
How to resolve 'Size Error DX' on Brother All in One Printer?
A 'Size Error DX' on your Brother All in One Printer means the paper in the tray isn't suitable for automatic duplex printing. Load either Letter, Legal, or Folio paper for automatic duplex printing.
Why is duplex printing disabled on my Brother All in One Printer?
If your Brother All in One Printer shows 'Duplex Disabled', it means either the duplex tray is removed or not properly installed, or the back of the machine isn't completely closed. Make sure the duplex tray is correctly inserted until it clicks into place, and ensure the back cover of the machine is closed.
What causes 'Document Jam' on Brother MFC-7860DW All in One Printer?
A 'Document Jam' error on your Brother All in One Printer means the document wasn't inserted or fed correctly, or the document scanned from the ADF was too long.
General| Secure printing | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 2400 x 600 DPI |
| Time to first page (black, normal) | 9 s |
| Print speed (black, normal quality, A4/US Letter) | 26 ppm |
| Duplex print speed (black, normal quality, A4/US Letter) | 5 ppm |
| Scan to | E-mail, E-mail Server, File, FTP, Image, OCR |
| Scanner type | Flatbed & ADF scanner |
| Grayscale levels | 256 |
| Input color depth | 48 bit |
| Output color depth | 24 bit |
| Image formats supported | BMP, JPG, TIF |
| Maximum scan resolution | 19200 x 19200 DPI |
| Optical scanning resolution | 600 x 2400 DPI |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | 600 x 600 DPI |
| Maximum number of copies | 99 copies |
| N-in-1 copy function (N=) | 2, 4 |
| Time to first copy (black, normal) | 11 s |
| Copy speed (black, normal quality, A4) | 26 cpm |
| Faxing | Mono faxing |
| Fax memory | 500 pages |
| Modem speed | 33.6 Kbit/s |
| Fax coding methods | JBIG, MH, MMR (Fax coding method), MR |
| Fax speed dialing (max numbers) | 200 |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Auto document feeder (ADF) input capacity | 35 sheets |
| Display | LCD |
| Market positioning | Home & office |
| Display number of lines | 2 lines |
| Display number of characters | 16 |
| Internal memory | 32 MB |
| Processor family | ARM |
| Processor frequency | 200 MHz |
| Card reader integrated | No |
| Sound pressure level (copying) | 53 dB |
| Sound pressure level (printing) | 30 dB |
| Custom media width | 76.2 - 216 mm |
| Maximum print size | 216 x 406 mm |
| Custom media length | 116 - 406.4 mm |
| Paper tray media types | Bond paper, Envelopes, Labels, Plain paper, Recycled paper |
| Paper tray media weight | 60 - 105 g/m² |
| Non-ISO print media sizes | Letter |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Auto Document Feeder (ADF) media weight | 64 - 90 g/m² |
| Security algorithms | 128-bit WEP, 64-bit WEP, WPA-AES, WPA-PSK, WPA-TKIP, WPA2-PSK |
| Dimensions (WxDxH) | 527 x 510 x 493 mm |
| All-in-one functions | Copy, Fax, Print, Scan |
| Color all-in-one functions | Scan |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | 1 |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 55 W |
| Power consumption (PowerSave) | 0.9 W |
| Power consumption (average operating) | 445 W |
| Sustainability certificates | ENERGY STAR |
| Maximum duty cycle | - pages per month |
| Package weight | 11600 g |
Weight and Dimensions| Weight | 14800 g |
|---|
To Next Page
