How to activate wireless setting on Brother MFC-7860DW All in One Printer?
To fix this, turn the wireless setting to ON. If a LAN cable is connected, disconnect it and then turn the wireless setting ON. 1. Press Menu, then 6 (Network), then 2 (WLAN), then 2 (Setup Wizard). 2. When 'WLAN Enable?' appears, press 1 to select 'On'. This will initiate the wireless setup wizard.
What does 'Size Error DX' mean on my Brother MFC-7860DW and how to solve it?
If your Brother All in One Printer displays 'Size Error DX', it means the paper in the tray is not a suitable size for automatic duplex printing. Load A4 paper for automatic duplex printing, and then press Start.
How to fix 'Replace Drum' error on Brother All in One Printer?
If your Brother All in One Printer displays 'Replace Drum', it means it is time to replace the drum unit. Replace the drum unit.
What does 'Fuser Error' mean on my Brother All in One Printer and how to resolve it?
If your Brother All in One Printer displays 'Fuser Error', it means the temperature of the fuser unit did not rise to the specified temperature within the specified time. Turn the power off, wait a few seconds, and then turn it on again. Leave the machine for 15 minutes with the power on.
What does 'No Toner' mean on my Brother All in One Printer?
If your Brother All in One Printer displays 'No Toner', it means the toner cartridge is not installed correctly. Pull out the drum unit, remove the toner cartridge, and then put it back into the drum unit.
Why is duplex disabled on my Brother MFC-7860DW All in One Printer?
If 'Duplex Disabled' appears on your Brother All in One Printer, it means the duplex tray is either removed or not correctly installed. Make sure to carefully put the duplex tray into the machine until it clicks into place. Also, ensure that the back of the machine is completely closed.
What does 'Fuser Error' mean on my Brother MFC-7860DW All in One Printer?
If your Brother All in One Printer displays 'Fuser Error', it means the temperature of the fuser unit did not rise to the specified temperature within the specified time. Turn the power off, wait a few seconds, then turn it back on and leave the machine on for 15 minutes.
What does 'Limit Exceeded' mean on my Brother All in One Printer and how to resolve it?
If your Brother All in One Printer displays 'Limit Exceeded', it means the Page Limit set in Secure Function Lock 2.0 for your ID has been reached. Contact your administrator to check your Secure Function Lock Settings.
What does 'Toner Low' mean on my Brother MFC-7860DW All in One Printer?
If your Brother All in One Printer is displaying 'Toner Low', it means the toner is running low. It's recommended to purchase a new toner cartridge to have on hand before you receive a 'Replace Toner' message.
How do I fix a 'Drum Error' on my Brother All in One Printer?
If your Brother All in One Printer is showing a 'Drum Error', it indicates that the corona wire on the drum unit needs cleaning. Clean the corona wire on the drum unit to resolve this issue.
General| Secure printing | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 2400 x 600 DPI |
| Time to first page (black, normal) | 9 s |
| Print speed (black, normal quality, A4/US Letter) | 26 ppm |
| Duplex print speed (black, normal quality, A4/US Letter) | 5 ppm |
| Scan to | E-mail, E-mail Server, File, FTP, Image, OCR |
| Scanner type | Flatbed & ADF scanner |
| Grayscale levels | 256 |
| Input color depth | 48 bit |
| Output color depth | 24 bit |
| Image formats supported | BMP, JPG, TIF |
| Maximum scan resolution | 19200 x 19200 DPI |
| Optical scanning resolution | 600 x 2400 DPI |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | 600 x 600 DPI |
| Maximum number of copies | 99 copies |
| N-in-1 copy function (N=) | 2, 4 |
| Time to first copy (black, normal) | 11 s |
| Copy speed (black, normal quality, A4) | 26 cpm |
| Faxing | Mono faxing |
| Fax memory | 500 pages |
| Modem speed | 33.6 Kbit/s |
| Fax coding methods | JBIG, MH, MMR (Fax coding method), MR |
| Fax speed dialing (max numbers) | 200 |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Auto document feeder (ADF) input capacity | 35 sheets |
| Display | LCD |
| Market positioning | Home & office |
| Display number of lines | 2 lines |
| Display number of characters | 16 |
| Internal memory | 32 MB |
| Processor family | ARM |
| Processor frequency | 200 MHz |
| Card reader integrated | No |
| Sound pressure level (copying) | 53 dB |
| Sound pressure level (printing) | 30 dB |
| Custom media width | 76.2 - 216 mm |
| Maximum print size | 216 x 406 mm |
| Custom media length | 116 - 406.4 mm |
| Paper tray media types | Bond paper, Envelopes, Labels, Plain paper, Recycled paper |
| Paper tray media weight | 60 - 105 g/m² |
| Non-ISO print media sizes | Letter |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Auto Document Feeder (ADF) media weight | 64 - 90 g/m² |
| Security algorithms | 128-bit WEP, 64-bit WEP, WPA-AES, WPA-PSK, WPA-TKIP, WPA2-PSK |
| Dimensions (WxDxH) | 527 x 510 x 493 mm |
| All-in-one functions | Copy, Fax, Print, Scan |
| Color all-in-one functions | Scan |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | 1 |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 55 W |
| Power consumption (PowerSave) | 0.9 W |
| Power consumption (average operating) | 445 W |
| Sustainability certificates | ENERGY STAR |
| Maximum duty cycle | - pages per month |
| Package weight | 11600 g |
Weight and Dimensions| Weight | 14800 g |
|---|
To Next Page
