Brother MFC-820CW - Setting Your Station ID; Setting Tone or Pulse Dialling Mode

Setting Up the Machine
10
STEP 1
7 Setting your station ID
You should store your name and fax number to be
printed on all fax pages that you send.
1 Press Menu.
2 Press a or b to choose Initial Setup.
Press OK.
3 Press a or b to choose Station ID.
Press OK.
4 Enter your fax number (up to 20 digits) on the
dial pad, and then press OK.
Station ID Fax:
_
5 Enter your name (up to 20 characters) using
the dial pad, and then press OK.
Station ID Name:
_
Note
See the following chart for entering your name.
If you need to enter a character that is on the same
key as the last character, press c to move the
cursor to the right.
6 Press Stop/Exit.
Note
If you want to repeat input, press Stop/Exit to start
from step 1.
For details, see Entering Text in Appendix C
of the User’s Guide.
8 Setting tone or pulse dialling
mode
1 Press Menu.
2 Press a or b to choose Initial Setup.
Press OK.
3 Press a or b to choose Tone/Pulse.
Press OK.
4 Press a or b to choose Pulse (or Tone).
Press OK.
5 Press Stop/Exit.
Press
key
One time Two
times
Three
times
Four
times
2 ABC2
3 DEF3
4 GH I 4
5 JKL5
6 MNO6
7 PQRS
8 TUV8
9 WX Y Z