Brother MFC-820CW - How to Set the Machines Network Settings to Wireless LAN or Wired LAN

For Network Users
40
How to set the machine’s
network settings to wireless
LAN or wired LAN
To connect your Brother machine to a wireless or
wired network you must configure the machine from
the machine’s control panel for the network type you
are using.
For wireless LAN
On your machine, press Menu.
Press a or b to choose LAN and press OK.
Press a or b to choose Network I/F and press
OK.
Press a or b to choose WLAN and press OK.
Press 1 for Yes to accept the change.
The wired network interface will become inactive with
this setting.
It will take about a minute for the LAN menu on the
LCD to become available again.
For wired LAN
On your machine, press Menu.
Press a or b to choose LAN and press OK.
Press a or b to choose Network I/F and press
OK.
Press a or b to choose Wired LAN and press OK.
Press 1 for Yes to accept the change.
The wireless network interface will become inactive
with this setting.
It will take about a minute for the LAN menu on the
LCD to become available again.