EasyManuals Logo

Brother MFC-820CW Quick Setup Guide

Brother MFC-820CW
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Setting Up the Machine
6
STEP 1
Note
If you are sharing one phone line with an external
telephone, connect it as shown below.
1 Extension telephone
2 External telephone
Note
If you are sharing one phone line with an external
telephone answering machine, connect it as
shown below.
Set the receive mode to ‘External TAD’ if you
have an external answering machine. For
details, see Connecting an external device to
your machine in Chapter 7 of the User’s
Guide.
4 Installing the ink cartridges
Warning
If ink gets in your eyes, wash them out with water
at once, and if irritation occurs consult a doctor.
1 The LCD shows:
No Cartridge
Black
Yellow
Cyan
Magenta
Note
Make sure that the power is turned on.
2 Lift the scanner cover (1) from the right-hand
side of the machine until it locks securely into
the open position.
3 Remove the yellow protective parts (1).
Note
Do not throw away the yellow protective parts. You
will need them if you transport the machine.
1
2
1
1

Other manuals for Brother MFC-820CW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-820CW and is the answer not in the manual?

Brother MFC-820CW Specifications

General IconGeneral
BrandBrother
ModelMFC-820CW
CategoryAll in One Printer
LanguageEnglish

Related product manuals