Brother MFC-820CW - Page 35

Installing the Driver & Software
33
Macintosh
®
Wired
Network
Macintosh
®
Improper Setup
If you have setup wireless networking on your
machine before and you setup the wired
network, you should check that the machine’s
Network I/F is Wired LAN. The wireless
network interface will be inactive with this
setting.
On your machine, press Menu.
Press a or b to choose LAN and press OK.
Press a or b to choose Network I/F and
press OK.
Press a or b to choose Wired LAN and press
OK.
Press 1 for Yes to accept the change. The
machine will restart automatically.
12 From the Apple
®
menu, click Chooser.
13 Click the Brother Ink (IP) icon, and then
choose BRN_xxxxxx (where xxxxxx are the
last six digits of the Ethernet address). Close
the Chooser.
For more information about connecting the
machine to a Macintosh
®
network, see
Chapter 6 of the Network User’s Guide on the
CD-ROM.
The MFL-Pro Suite, Printer Driver and
Scanner Driver have been installed.
Note
ControlCenter2 is not supported in Mac OS
®
9.x.
14 To install Presto!
®
PageManager
®
, click the
Presto! PageManager icon and follow the
on-screen instructions.
Note
You can easily scan, share, and organize photos
and documents using Presto!
®
PageManager
®
.
Presto!
®
PageManager
®
has been
installed and the installation is now
complete.