To Next PageTo Next Page
How to fix incorrect SSID or Network Key on Brother All in One Printer?
If the security information (SSID/Network Key) is incorrect on your Brother All in One Printer, reconfirm the SSID and security information (Network Key). If your router uses WEP encryption, make sure you enter the key used as the first WEP key, since your Brother machine only supports the use of the first WEP key.
What to do if the wireless network and security setting is incorrect on Brother MFC-8510DW?
If the wireless network and security settings entered are incorrect on your Brother All in One Printer, reconfirm the wireless network settings. Ensure the entered or selected SSID/authentication method/encryption method/UserID/Userpass are correct.
What causes 'Document Jam' on my Brother All in One Printer?
If your Brother All in One Printer displays 'Document Jam', the document was not inserted or fed correctly, or the document scanned from the ADF was too long.
How to fix 'Replace Parts Drum' message on Brother All in One Printer?
If your Brother All in One Printer displays 'Replace Parts Drum', it is time to replace the drum unit or the drum unit counter was not reset when a new drum was installed. Replace the drum unit or reset the drum unit counter.
What to do if my Brother MFC-8510DW All in One Printer says 'Jam Inside'?
If your Brother All in One Printer is displaying 'Jam Inside', it indicates that the paper is jammed inside the machine or the toner cartridge is placed in the machine without the drum unit. Put the toner cartridge into the drum unit, and then re-install the drum unit and toner cartridge assembly in the machine.
How to fix 'Replace Toner' message on Brother MFC-8510DW All in One Printer?
If your Brother All in One Printer displays 'Replace Toner', the toner cartridge is at the end of its life, and the machine will stop all print operations. Replace the toner cartridge.
What does 'Toner Low' mean on my Brother MFC-8510DW All in One Printer?
If your Brother All in One Printer displays 'Toner Low', the toner cartridge is near the end of its life. Order a new toner cartridge now, so a replacement will be available when the LCD shows 'Replace Toner'.
What to do if my Brother Printer 'Cannot Connect' because a device is already connected?
If your Brother printer displays 'Cannot Connect A device is already connected', it means another mobile device is already connected to the Wi-Fi Direct network when the Brother machine is the G/O (Group Owner). Wait for the current connection between your Brother machine and the other mobile device to shut down, and then try configuring the Wi-Fi Direct settings again.
Why does my Brother Printer show a 'Connection Error'?
A 'Connection Error' on your Brother printer indicates that other devices are attempting to connect to the Wi-Fi Direct network simultaneously. To resolve this, ensure no other devices are trying to connect to the Wi-Fi Direct network, and then attempt to configure the Wi-Fi Direct settings again.
What to do if my Brother Printer shows a 'No Device' error?
If your Brother printer displays a 'No Device' error, it means the printer can't find your mobile device. Here’s what to do: * Ensure both your printer and mobile device are in Wi-Fi Direct mode. * Move the mobile device closer to the Brother printer. * Remove any obstructions between the devices. * If manually configuring Wi-Fi Direct, verify the password is correct. * If your mobile device requires IP address configuration, ensure it's set to DHCP.
General| Print Technology | Laser |
|---|---|
| Functionality | Print, Copy, Scan, Fax |
| Print Resolution | 1200 x 1200 dpi |
| Connectivity | USB, Ethernet, Wi-Fi |
| Automatic Duplex Printing | Yes |
| Paper Capacity | 250 sheets |
| Automatic Document Feeder (ADF) | Yes |
| ADF Capacity | 50 sheets |
| Scanning Resolution | 1200 x 1200 dpi |
| Fax Speed | 33.6 Kbps |
| Operating Systems | Windows, macOS, Linux |
| Mobile Printing | Brother iPrint&Scan, Google Cloud Print, AirPrint |
| Maximum Paper Size | Legal |
| Scan Type | Flatbed |
