Brother MFC-8520DN - Additional Sending Operations; Sending a Fax Manually; Dual Access

Sending a fax
15
3
Additional sending
operations 3
Sending a fax manually 3
Manual transmission 3
Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
a Make sure you are in FAX mode .
b Load your document.
c Pick up the handset of an external
telephone and listen for a dial tone.
d Dial the fax number using the external
telephone.
e When you hear the fax tone, press
Start.
 If you are using the scanner glass,
press 1 to send a fax.
f Replace the handset of the external
telephone.
Dual access 3
You can dial a number and start scanning the
fax into memory—even when the machine is
sending from memory, receiving faxes or
printing PC data. The LCD will show the new
job number.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
Note
If you get an Out of Memory message
while scanning the first page of a fax,
press Stop/Exit to cancel scanning. If you
get an Out of Memory message while
scanning a subsequent page, you can
press Start to send the pages scanned so
far, or press Stop/Exit to cancel the
operation.