Brother MFC-8520DN - Remote Operation and Codes

Dialling and storing numbers
41
5
Deleting Group numbers 5
You can delete a Group number that has
already been stored. The LCD will show the
name or number, and if the Group has been
set to a fax forwarding number, it will display
a message.
a Press Menu, 2, 3, 3.
23.Address Book
3.Setup Groups
Group Dial:
Press Speed Dial or On
b Choose the One Touch key or Speed
Dial number where the Group is stored.
Do one of the following:
 Press the One Touch key.
 Press (Address Book) and enter
the three-digit Speed Dial number.
Press OK.
Note
If the Group number you are trying to
delete has been set to a fax forwarding
number, the LCD will ask you if you want
to delete the name or number.
c To delete the Group, press 2.
23.Address Book
G01:*001*002#001
a 1.Change
b 2.Clear
Select ab or OK
d Do one of the following:
 To delete the Group, press 1.
 To exit without deleting the Group,
press 2.
23.Address Book
Erase This Data?
a 1.Yes
b 2.No
Select ab or OK
e Press Stop/Exit.