Brother MFC-8520DN - Setting the Fax Receive Stamp; Setting the Print Density; Printing a Fax from the Memory

Receiving a fax
31
4
Setting the Fax Receive
Stamp 4
You can set the machine to print the received
date and time in the top centre of each
received fax page.
a Make sure you are in FAX mode .
b Press Menu, 2, 1, 8.
c Press a or b to choose On or Off.
Press OK.
d Press Stop/Exit.
Note
• The received time and date will not appear
when using Internet Fax.
• Make sure you have set the current date
and time in the machine. (uu Quick Setup
Guide)
Setting the Print Density 4
You can adjust the Print Density setting to
make your printed pages darker or lighter.
a Make sure you are in FAX mode .
b Press Menu, 2, 1, 6.
c Press c to make the print darker.
Or, press d to make the print lighter.
Press OK.
d Press Stop/Exit.
Printing a fax from the
memory 4
If you are using the Fax Storage feature
(Menu, 2, 5, 1), you can still print a fax from
the memory when you are at your machine.
(See Fax Storage uu page 25.)
a Press Menu, 2, 5, 3.
b Press Start.
c Press Stop/Exit.