Brother MFC-885CW - Configure LCD Contrast; Set Date and Time

Setting Up the Machine
12
STEP 1
6 Setting the LCD contrast
You can adjust the LCD contrast for a sharper and
more vivid display. If you are having difficulty reading
the LCD, try changing the contrast setting.
1 Press Menu.
2 Press a or b to choose General Setup.
Press OK.
3 Press a or b to choose LCD Settings.
Press OK.
4 Press a or b to choose LCD Contrast.
5 Press or to choose Light, Med or
Dark.
Press OK.
6 Press Stop/Exit.
Note
You can also adjust the angle of the LCD display
by lifting it.
7 Setting the date and time
The machine displays the date and time, and if you
set up the station ID it will add it to each fax you send.
1 Press Menu.
2 Press a or b to choose Initial Setup.
Press OK.
3 Press a or b to choose Date&Time.
Press OK.
4 Enter the last two digits of the year on the dial
pad, and then press OK.
(e.g. Enter 0 7 for 2007.)
5 Enter the two digits for the month on the dial
pad, and then press OK.
(e.g. Enter 0 3 for March.)
6 Enter the two digits for the day on the dial pad,
and then press OK.
(e.g. Enter 0 1 for the first day of the month.)
7 Enter the time in 24-hour format on the dial
pad, and then press OK.
(e.g. Enter 1 5, 2 5 for 15:25.)
8 Press Stop/Exit.
Date&Time
Year:20
07
MENU Input & Press OK
Date&Time
Month:
03
MENU
Input & Press OK
Date&Time
Day:
01
MENU
Input & Press OK
Date&Time
Time:
15:25
MENU
Input & Press OK