Brother MFC-885CW - Restore Network Settings to Factory Default

For Network Users
54
3 Restoring the network
settings to factory default
To restore all network settings of the internal
Print/Scan server to factory default, please follow the
steps below.
1 Make sure the machine is not operating, then
disconnect all the cables from the machine
(except power cable).
2 Press Menu.
3 Press a or b to choose LAN.
Press OK.
4 Press a or b to choose Factory Reset.
Press OK.
5 Press 1 to choose Yes.
6 Press 1 to choose Yes.
7 The machine will restart, re-connect cables
once this is complete.