Brother MFC-8912DW - 2. OTHER SERVICE FUNCTIONS; 2.1 Change ON;OFF Setting for Deep Sleep Mode

5-46
Confidential
2. OTHER SERVICE FUNCTIONS
2.1 Change ON/OFF Setting for Deep Sleep Mode
This function allows you to change the Deep Sleep mode setting to ON or OFF.
<Operation Procedure>
Non touch panel models
(1) While the machine is in the ready state,
press the [Menu] button. Then press the
[ ] or [ ] button to select "General
Setup", and press the [OK] button.
(2) Press the [ ] or [ ] button to select
"Ecology", and press the [OK] button.
(3) Press the [ ] or [ ] button to select
"Sleep Time", and press the [OK]
button.
(4) While "**Min" is displayed, press the
[Start] and [Secure Print] buttons
simultaneously.
(5) Press the [ ] or [ ] button to change
the setting to On or Off, and press the
[OK] button.
(6) The new setting is saved, and the LCD
returns to the Sleep Time display.
Touch panel models
(1) While the machine is in the ready state,
press the [Menu] button, and press
"General Setup" on the LCD.
(2) Press "Ecology" on the LCD.
(3) Press "Sleep Time" on the LCD.
(4) Press the [Start] and [*] buttons
simultaneously. "Deep Sleep/On/Off" is
displayed on the LCD.
(5) Press [On] or [Off] on the LCD.
(6) The new setting is saved, and the LCD
returns to the Sleep Time display.