Brother MFC-8912DW User Manual

7-3
Confidential
2.2 Fuser unit
(1) Open the back cover.
(2) Push both ribs of the back cover in the direction of the arrows, and remove the two
bosses on the outer chute.
Fig. 7-2
(3) Remove the back cover from boss A on the machine, and remove the back cover from
the machine.
(4) Open the outer chute approximately 80 degrees. Remove the outer chute from boss B
on the right side of the machine, and remove the outer chute from the machine in the
direction of the arrow.
Fig. 7-3
Note:
• Be careful not to damage the ribs inside the back cover.
Assembling Note:
• When attaching the back cover, open the front cover and attach the back cover
while lifting the rear nip release link.
Back cover
Outer chute
Rib
Boss
Boss
Rib
Rear nip release link
Outer chute
Back cover
Boss B
Boss A
80°
Outer chute
Boss A
Boss B

Brother MFC-8912DW Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Paper Capacity	250 sheets
Connectivity	USB, Ethernet, Wi-Fi
Automatic Document Feeder (ADF)	Yes
ADF Capacity	50 sheets
Paper Capacity (Multi-purpose Tray)	50 sheets
Display Size	2.7 inches
Memory	256 MB
Processor	600 MHz
Scan Resolution	1200 x 1200 dpi
Fax Speed	33.6 Kbps
Mobile Printing	Brother iPrint&Scan, Google Cloud Print
Dimensions (W x D x H)	16.1 x 12.5 inches