Brother MFC-8950DW - Page 53

Telephone and external devices
43
7
Turning on the Remote Codes 7
You need to turn the Remote Codes setting to
On to use the Fax Receive Code and
Telephone Answer Code.
a Press Menu.
b Press a or b to display Fax.
Press Fax.
c Press a or b to display
Setup Receive.
Press Setup Receive.
d Press a or b to display Remote Codes.
Press Remote Codes.
e Press On.
f If you do not want to change the Remote
Activation Code, press on the LCD.
g Press Stop/Exit.
Changing the Remote Codes 7
The preset Remote Activation Code is l51.
The preset Remote Deactivation Code is #51.
If you are always disconnected when
accessing your External TAD, try changing
the three-digit remote codes, for example ###
and 555.
a Press Menu.
b Press a or b to display Fax.
Press Fax.
c Press a or b to display
Setup Receive.
Press Setup Receive.
d Press a or b to display Remote Codes.
Press Remote Codes.
e Press On or Off.
f If you chose On in step e, enter the new
Remote Activation Code.
Press OK.
g Enter the new Remote Deactivation
Code.
Press OK.
h Press Stop/Exit.