29
Configuring your machine for a wireless network (For MFC-8710DW, MFC-8910DW and MFC-8950DW(T))
k Choose the Authentication method using a or b, and press OK.
Do one of the following:
If you chose LEAP, go to step q.
If you chose EAP-FAST, go to step l.
If you chose PEAP, go to step l.
If you chose EAP-TTLS, go to step l.
If you chose EAP-TLS, go to step m.
l Choose the Inner Authentication method NONE, CHAP, MS-CHAP, MS-CHAPv2, GTC or PAP using a or b,
and press OK.
Go to step m.
Depending on your Authentication method, the Inner Authentication method selections differ.
m Choose encryption type TKIP or AES using a or b, and press OK.
Do one of the following:
If your Authentication method is EAP-TLS, go to step n.
For other Authentication methods, go to step o.
n The machine will display a list of available Client Certificates. Choose the certificate and go to step o.
o Choose the verification method No Verification, CA or CA + Server ID using a or b, and press
OK.
Do one of the following:
If you chose CA + Server ID, go to step p.
For other selections, go to step q.
If you have not imported a CA certificate in your machine, the machine will display No Verification.
To import a CA certificate, see Using Certificates for device security uu page 132.
p Enter the server ID. (For information on how to enter text: uu Quick Setup Guide.) Go to step q.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
