Brother MFC-9120CN - Software, Network, and Appendixes; Software Features and Guides

Chapter 12
90
To change the default setting follow the steps
below:
a Press Menu, 3, 3.
Copy
3.Contrast
b Press a or b to increase or decrease the
contrast.
Press OK.
c Press Stop/Exit.
Brightness 12
Adjust the copy brightness to make copies
darker or lighter.
To temporarily change the copy brightness
setting, follow the steps below:
a Make sure you are in Copy mode .
b Load your document.
c Use the dial pad to enter the number of
copies (up to 99).
d Press Options.
Press a or b to choose Brightness.
Press OK.
e Press a to make a lighter copy or press
b to make a darker copy.
Press OK.
f Press Black Start or Color Start.
To change the default setting follow the steps
below:
a Press Menu, 3, 2.
Copy
2.Brightness
b Press a to make a lighter copy or press
b to make a darker copy.
Press OK.
c Press Stop/Exit.
Color saturation 12
You can change the default setting for color
saturation.
To change the default setting follow the steps
below:
a Press Menu, 3, 4.
Copy
4.Color Adjust
b Press a or b to choose 1.Red,
2.Green, or 3.Blue.
Press OK.
c Press a or b to increase or decrease the
color saturation.
Press OK.
d Return to step b to choose the next
color. Or press Stop/Exit.