236
Wireless one-push configuration E
If your wireless access point supports either SecureEasySetup™, Wi-Fi Protected Setup (PBC
1
)
or AOSS™, you can configure the machine easily without a computer. By pushing a button on the
wireless LAN router / access point and using the menu on the machine, you can set up the
wireless network and security settings. See the User’s Guide for your wireless LAN router / access
point for instructions on how to access one-push mode.
1
Push Button Configuration
Note
Routers or access points that support SecureEasySetup™, Wi-Fi Protected Setup or AOSS™
have the symbols shown below.
To Next Page
Loading...
