Brother MFC-9120CN - Cleaning the Paper Pick-Up Rollers

Troubleshooting and routine maintenance
163
C
i Slide each drum unit and toner cartridge
assembly into the machine. Make sure
that you match the toner cartridge color
to the same color label on the machine.
C-Cyan M-Magenta Y-Yellow K-Black
j Close the top cover of the machine.
k Plug the machine’s power cord back into
the AC power outlet first, and then
reconnect all cables and telephone line
cord. Turn on the machine’s power
switch.
Cleaning the paper pick-up
rollers C
If you have paper feed problems, clean the
pick-up rollers as follows:
a Turn off the machine’s power switch.
Unplug the power cord from the AC
power outlet.
b Pull the paper tray completely out of the
machine.
c Tightly wring out a lint-free cloth soaked
in lukewarm water, and then wipe the
separator pad (1) of the paper tray with
it to remove dust.
K
Y
M
C
1