3-88
Confidential
(2) Command reception
(3) Communication code compatibility [checking the NSF and DIS]
Code 1 Code 2 Cause
20 01 Unable to detect a flag field.
20 02 Carrier was OFF for 200 ms or longer.
20 03 Abort detected (“1” in succession for 7 bits or more).
20 04 Overrun detected.
20 05 A frame for 3 seconds or more received.
20 06 CRC error in answerback.
20 07 Echo command received.
20 08 Invalid command received.
20 09 Command ignored once for document setting or for dumping-out
at turn-around transmission.
20 0A T5 time-out error
20 0B CRP received.
20 0C EOR and NULL received.
Code 1 Code 2 Cause
32 01 Remote terminal only with V.29 capability in 2,400 or 4,800 bps
transmission.
32 02 Remote terminal not ready for polling.
32 10 Remote terminal not equipped with password function or its
password switch OFF.
32 11 Remote terminal not equipped with or not ready for confidential
mailbox function.
32 12 Remote terminal not equipped with or not ready for relay
broadcasting function.
32 13 No confidential mail in the remote terminal.
32 14 The available memory space of the remote terminal is less than
that required for reception of the confidential or relay
broad-casting instruction.
32 18 Remote terminal not equipped with color function.
To Next Page
Loading...
