Brother MFC-9320CW - Hinge R;Hinge R Support;Hinge Base

5-60
Confidential
8.13 Hinge R/Hinge R Support/Hinge Base
(1) Remove the Taptite cup B M3x10 screw, and then remove the Hinge R support from the
Hinge R, and remove the Hinge R from the Hinge base.
Fig. 5-43
(2) Remove the three Taptite cup B M3x10 screws, and then remove the Hinge base from the
ADF unit.
Fig. 5-44
Taptite cup B M3x10
Hinge R support
Hinge R
ADF unit
Hinge base
Taptite cup B M3x10
Hinge base
ADF unit